ROHN RSL 100 Foot Heavy Duty Tube Brace Tower Kit - RSL100H10
ROHN RSL100H10 Complete 100 Foot Heavy Duty Tube Bracing Tower
U-Shaped Legs allows for simple lap splice connection. Pre-punched holes for attachment of safety climb systems, mounting kits, etc., braces for each section are the same length, while bolt lengths are standard throughout the tower. Tower material is Hot-Dipped Galvanized, Assembly drawings provided with tower, top closing angle standard with each tower package.
Structure Classification – 11
Exposure Category – C
Topo-Graphic Category - 1
3-Second Gust Wind Speed -w- Ice - 40 MPH
Design Ice Thickness - 1"
Earthquake Spectral Response Acceleration - 2.50
Heavy Tube Bracing Dish Loading
|
RSL90H20 90 Foot Heavy-Duty Tube Bracing Tower |
||
|
Sections |
R1H – Heavy Duty (Tube) Section 1 R2H – Heavy Duty (Tube) Section 2 R3H – Heavy Duty (Tube) Section 3 R4H – Heavy Duty (Tube) Section 4 R5H – Heavy Duty (Tube) Section 5 R6H – Heavy Duty (Tube) Section 6 R7H – Heavy Duty (Tube) Section 7 R8H – Heavy Duty (Tube) Section 8 R9H – Heavy Duty (Tube) Section 9 R10H – Heavy Duty (Tube) Section 10 |
|
|
Bolt Kits |
10 |
|
|
Top Kit |
RSLH1A |
|
|
ACWS Anti-Climb Warning Sign |
||
|
Assembly Guide |
||
|
OPTIONS |
||
|
Short Base |
RSB10 |
|
|
Anchor Bolts |
RAL10 |
|
|
Grounding Kits |
Grounding Kit (3 Leg) Grounding Kit (1 Leg) |
RGKG RGKG-1 |
Optional Accessories are available and may be ordered separately:
- Step Bolts
- Safety Climbing System*
- Top Mast
- Anti-Climb Brackets
- Multiple Mounting Kits
- Grounding Kits
- Top Plate
- Accessory Shelf
- Waveguide Brackets
- Lightning Rod
*Per Rev G requirements, any structure greater than 10', requires a climber safety device.
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesiveness of the soil to prevent the chance of tower tip over, as well as the strength of the tower members to withstand these Forces against them.
ROHN Tower Kits are designed based on assumptions made regarding Wind Speed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, fill out this form and send it to support@3starinc.com
Download
RSL Tower Legs & Sections
The ROHN RSL is a light weight self-supporting tower designed for use in broadband, public safety and security applications. The RSL reaches above line-of-site obstacles such as tree tops, hilly terrain and buildings. The RSL is shipped knocked down to reduce shipping cost and time.
All three tower legs in each section have provision to install step bolts and a safety climb system. When step bolts are desired, one step bolt kit must be ordered for each section of the tower. Increase the number of step bolt kits accordingly when step bolts are desired on more than one tower leg of a section.
U-shaped legs allows for simple lap splice connection .Available in standard and heavy models. Pre-punched holes for attachment of safety climb systems, mounting kits, etc. Braces for each section are the same length, while bolt lengths are standard throughout the tower . Tower material is hot-dip galvanized
