ROHN 45SS045 45' foot 45G Self-Supporting Tower Complete Pre-engineered Kit
ROHN
Made in the USA!
The ROHN 45SS045 45' foot 45G Self-Supporting Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 45SS045 Kit is comprised of (4) 10' Tower Section(s), (1) Top Cap Section and Grounding Package(optional), less Foundation and Installation.
This Tower Package uses 5' foot of (1) 10' foot 45G Tower Section embedded in concrete pad/pier as substitution for (1) SB45G 5' foot Base Section!
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 45 Foot ROHN 45G Tower with EPA (Effective Projected Area) REV. F Ratings for 70, 80 or 90 MPH (No Ice) and REV. G Ratings for 90, 100 or 110 MPH (No Ice) 3-second Gust Wind Speeds. For more info click on the "More Info" or "Specification" Tabs above.
This Item Ships LTL Freight ONLY!
| INCLUDED MATERIALS WITH 45SS045 KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 1 | 45AG2 | Top Cap Tower Section |
| 4 | 45G | 10' Tower Section |
| 1 | 45AJBK | Bolt Kit for 45G Top Section |
| 4 | 45JBK | Bolt Kit for 45G Tower Section |
| 0 | SB45G | 5' of (1) 10' 45G Tower Section is Embedded in Concrete Pad in lieu of Base Section |
| 1 | ACWS | Anti-Climb Warning Sign |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
| OPTIONAL ACCESSORIES FOR 45SS045 KIT | ||
| QUANTITY | PART NUMBER | DESCRIPTION |
| 2 | BGK3G | Tower Base Grounding Kit /includes: (1) 10' of #4 Copper Wire (1) 5/8" x 8' Copper Clad Ground Rod (1) 5/8" Ground Rod Clamp (1) 5/16" x 2 3/8" Grade 5 HDG Bolt (1) 5/16" Hex HDG Nut (1) Hy-Lug YA4C-L4 Compression Terminal Lug |
The 45AG2* Top Cap Tower Section is the Default Standard
Top Section for the 45G Series Tower Kits.
We Offer the following Substitutions when Ordering Our Kits:
| OPTIONAL TOP CAPS FOR 45SS045 KIT | |||
|---|---|---|---|
| PART NUMBER | DESCRIPTION | HEIGHT | O.D. |
| 45AG | Top Cap | 9' | 2" |
| 45AG1 | Top Cap | 9' - 3" | 1.66" |
| 45AG2* | Top Cap | 9' - 9" | 2.25" |
| 45AG3 | Top Cap | 9' - 3 1/2" | 2.25"> |
| 45AG4 | Flat Plate Top Cap for Thrust Bearing |
8' - 3/16" | Pre-drilled FLAT |
| 45AG5 | Top Cap | 8' - 1/2" | 2.75" |
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter a Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
Download
ROHN 45GSR Tower Base Plate, Shelf and Accessories
ROHN Products, LLC Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. When Selecting a Base for Your ROHN 45GSR Tower, please evaluate that Structure or Foundation as being conducive to the Plan you envision. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 45GSR Tower Installation.
ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from your ROHN 45GSR Tower in both Self-Supporting and Guyed Installations. Assure yourself through Investigation that the Load you wish to add to the ROHN 45GSR Tower is Engineered into the total Load. As always, Consult your Local Structural Engineer and Building Code for guidance.
ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.
All Information regarding the ROHN 45GSR Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.
This Buyers Guide will answer many questions you may have on this Product Line.
Sorry, we are offline,
click here to send us message
