ROHN 65SS045 45' foot 65G Self-Supporting Tower Complete Pre-engineered Kit
ROHN
Made in the USA!
The ROHN 65SS045 45' foot 65G Self-Supporting Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 65SS045 Kit is comprised of (2) 20' Tower Section(s),(1) 10' Tower Section(s), (1) Top Cap Plate and Grounding Package(optional), less Foundation and Installation.
This Tower Package uses 5' foot of (1) 20' foot 65G Tower Section embedded in concrete pad/pier as substitution for (1) SB65GH 5' foot Base Section!
ROHN 65G Freestanding Towers offer an easy low cost solution to get light weight antennas, small dishes , broadband , WIFI and 2-Way Antennas on the air quickly. Hot Dipped Galvanized for corrosion protection . All sections are tubular and feature 1.9" OD pipe legs with cross bracing formed of a continuous 3/8" solid rod bracing into a zig-zag pattern for strength. All towers have "FIXED " bases.
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 45' Foot ROHN 65G Tower with EPA (Effective Projected Area) REV. F Ratings for 70, 80 or 90 MPH (No Ice) and REV. G Ratings for 90, 100 or 110 MPH (No Ice) 3-second Gust Wind Speeds. For more info click on the "More Info" or "Specification" Tabs above.
This Item Ships Dedicated Flatbed Freight ONLY!
Please Contact 3 Star Inc. directly for a Freight Quote.
| INCLUDED MATERIALS WITH 65SS045 KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 1 | CP4A | 65G Top Cap Plate Kit |
| 2 | 6520G | 20' Tower Section |
| 1 | 65G | 10' Tower Section |
| 3 | 65JBK | Bolt Kit for 65G Tower Section |
| 0 | SB45GH | 5' of (1) 20' 65G Tower Section is Embedded in Concrete Pad in lieu of Base Section |
| 1 | ACWS | Anti-Climb Warning Sign |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
| OPTIONAL ACCESSORIES FOR 65SS045 KIT | ||
| QUANTITY | PART NUMBER | DESCRIPTION |
| 2 | BGK2G | Tower Base Grounding Kit /includes: (1) 10' of #4 Copper Wire (1) 5/8" x 8' Copper Clad Ground Rod (1) 5/8" Ground Rod Clamp (1) 1 1/4" to 2" J-Clamp (For 55G/65G Section Tubular Rail) |
This 65G Tower is to be used in a Self-Supporting Configuration according to Use and Foundation Specifications in the ROHN Catalog. This Height Configuration relies on a SB65GH Embedded in a Concrete Foundation Specified by Engineering. As a Free-Standing, Self-Supporting Structure, a 70 MPH rated 65G Tower can rise to a maximum of 80 feet. Please Consult 3 Star Inc for more ROHN 65G Tower Configuration, Foundation and Grounding Detail Information.
Site-specific designs are available upon request. Use the RFQ Form found under the "More Info" Tab above.
Download
CAT6 Keystone Jack Inserts
Category 6 Operates at up to 550 MHz, instead of the 350 MHz of standard CAT 5E cables. These CAT 6 keystone inserts are fully ANSI/TIA/EIA 568 B.2-1 compliant. CAT 6 jacks are compatible with the current Category 6 Equipment, as well a Legacy and CAT 5. The Enhanced Electrical Performance of CAT 6 keystone inserts ensures capacity in supporting increased Bandwidth Application Requirements. Typical applications would include, Gigabit Ethernet, Distributed Video (CCTV) over CAT 5E, Voice over IP (VoIP). These CAT 6 jacks offer Excellent Performance in all aspects of Data Transmission.
A Keystone module is an industry standard type of wall jack used in residential and business environments. The system consists of a modular face plate to which jacks are mounted. Flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system.
A keystone jack module is a standardized snap-in package for mounting a variety of low-voltage electrical jacks such as TV, Phone, LAN, Data, BNC, RCA or optical connectors into a keystone wall plate, surface-mount box, or a patch panel. Keystone modules have a commonly popular standardized rectangular face of 14.5mm wide by 16.0mm high and are held in place with a flexible tab. This allows them to be snapped into or out of a mounting plate with correspondingly-sized rectangular holes, called ports. All keystones, regardless of the type of jack they carry, are interchangeable and replaceable. This is what makes Keystone a popular choice in today's installations at Home or Office. Some keystones use a pass-though type connector, where there is a jack on both the front face as well as the rear side. Others only have a jack on the front and employ a different means for hard-wiring signal cables in the rear, such as a mini 110, insulation-displacement connector, crimp or solder connection.
