5/8TBE&J Turnbuckle for Tower 5/8 x 12 inch Eye to Jaw

5/8TBE&J 5/8" x 12" Eye to Jaw Turnbuckle

Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.

Spec. Sheet

Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH, 5/16" Strand via Pre-formed deadend and 7/16THH or 5/16" Bare Strand via Cable Clamps and 3/8THH, 3/8" Strand via Pre-formed deadend and 1/2THH or 3/8" Bare Strand via Cable Clamps and 7/16THH) to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP, GAC5655TOP or GAC5755TOP). 17,500 lbs. Ultimate Strength. Eye to Jaw Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Pre-Formed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate or Closed Single Eye Anchor (the ones that Holes as the attachment Method, ie; R-GAR30 and R-GAC3455) on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Compare to ROHN R-5/8TBE&J 5/8 inch Eye to Jaw Turnbuckle!