ROHN 45SR020 20' foot 45GSR Self-Supporting Tower Complete Pre-engineered Kit
ROHN
Made in the USA!
The ROHN 45SR020 20' foot 45GSR Self-Supporting Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 45SR020 Kit is comprised of (1) 20' 45GSR20 Tower Section, (1) 4' 45GSRSB Short Base Section and Grounding Package (optional), less Foundation and Installation.
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 20 Foot ROHN 45GSR Tower with EPA (Effective Projected Area) REV. F Ratings for 70, 80 or 90 MPH (No Ice) and REV. G Ratings for 90, 100 or 110 MPH (No Ice) 3-second Gust Wind Speeds. For more info click on the "More Info" or "Specification" Tabs above.
This Item Ships Dedicated Flatbed Freight ONLY!
Please Contact 3 Star Inc. directly for a Freight Quote.
| INCLUDED MATERIALS WITH 45SR020 KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 0 | None Required | See Top Cap/Plate Options Below |
| 0 | 45GSR10 | 10' foot 45GSR Tower Section |
| 1 | 45GSR20 | 20' foot 45GSR Tower Section |
| 1 | 45GSRHDW | Bolt Kit for 45GSR Tower Section |
| 1 | 45GSRSB | 4' 45GSR Short Base Section |
| 1 | ACWS | Anti-Climb Warning Sign |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
| OPTIONAL ACCESSORIES FOR 45SR020 KIT | ||
| QUANTITY | PART NUMBER | DESCRIPTION |
| 2 | BGK3G | Tower Base Grounding Kit /includes: (1) 10' of #4 Copper Wire (1) 5/8" x 8' Copper Clad Ground Rod (1) 5/8" Ground Rod Clamp (1) 5/16" x 2 3/8" Grade 5 HDG Bolt (1) 5/16" Hex HDG Nut (1) Hy-Lug YA4C-L4 Compression Terminal Lug |
None is the Default Selection for a Top Cap or Plate as there
are no Top Cap Sections in the 45GSR Series Tower Series.
The Rails are Solid, not Hollow, and Terminate to Flanges.
We Offer These Optional Caps and Plates when Ordering:
| OPTIONAL TOP CAPS / PLATES FOR 45SR020 KIT | |||
|---|---|---|---|
| PART NUMBER | DESCRIPTION | HEIGHT | Mast OD |
| APL4A | Assembly Plate and Accessory Mount | 0' | N/A |
| 45GSRTTA | Tapered Cap with Mast Stub | 13.5" | 2.375" |
| BPL45GSR | Thrust Bearing Plate | 0' | N/A |
| Lightning Rod+Cap | (1) LRCL + (1) VW132 Mount | 0' | N/A |
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter a Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
Download
ROHN DM45G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 45G 45GSR Tower
- $289.00
ROHN 65G Tower Top Plates, Shelf and Accessories
Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 65G Tower Installation.
ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from, other Load Bearing Structures in the immediate vicinity of your ROHN 65G Tower in both Self-Supporting and Guyed Installations. These 65G Brackets are all Solid Galvanized Steel and could possibly convey considerable Load to the Structures of which they are attached. Assure yourself through Investigation that the Structure you wish to Bracket to will handle the ROHN 65G Tower's Load transferred to it as is, or can be Supplemented in some Engineered fashion as to match and counter the Load applied. As always, Consult your Local Structural Engineer and Building Code for guidance.
ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts and Top Cap Section Design differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.
All Information regarding the ROHN 65G Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.
This Buyers Guide will answer many questions you may have on this Product Line.
