ROHN 45SR040 40' foot 45GSR Self-Supporting Tower Complete Pre-engineered Kit
ROHN
Made in the USA!
The ROHN 45SR040 40' foot 45GSR Self-Supporting Tower Kit comes Complete and Pre-engineered as Specified in the ROHN Catalog for Use at the Rated Height, Antenna load and Wind Speed indicated. This 45SR040 Kit is comprised of (2) 20' 45GSR20 Tower Section, (0) 10' 45GSR10 Tower Section, (1) 4' 45GSRSB Short Base Section and Grounding Package (optional), less Foundation and Installation.
This Product Order Supplies the Following BOM (Less Foundation and Installation) in accordance for Use as a Self Supporting 40 Foot ROHN 45GSR Tower with EPA (Effective Projected Area) REV. F Ratings for 70, 80 or 90 MPH (No Ice) and REV. G Ratings for 90, 100 or 110 MPH (No Ice) 3-second Gust Wind Speeds. For more info click on the "More Info" or "Specification" Tabs above.
This Item Ships Dedicated Flatbed Freight ONLY!
Please Contact 3 Star Inc. directly for a Freight Quote.
| INCLUDED MATERIALS WITH 45SR040 KIT | ||
|---|---|---|
| QUANTITY | PART NUMBER | DESCRIPTION |
| 0 | None Required | See Top Cap/Plate Options Below |
| 0 | 45GSR10 | 10' foot 45GSR Tower Section |
| 2 | 45GSR20 | 20' foot 45GSR Tower Section |
| 2 | 45GSRHDW | Bolt Kit for 45GSR Tower Section |
| 1 | 45GSRSB | 4' 45GSR Short Base Section |
| 1 | ACWS | Anti-Climb Warning Sign |
| 1 | ASSEMBLY GUIDE | Printed Specification/Assembly Guide |
| OPTIONAL ACCESSORIES FOR 45SR040 KIT | ||
| QUANTITY | PART NUMBER | DESCRIPTION |
| 2 | BGK3G | Tower Base Grounding Kit /includes: (1) 10' of #4 Copper Wire (1) 5/8" x 8' Copper Clad Ground Rod (1) 5/8" Ground Rod Clamp (1) 5/16" x 2 3/8" Grade 5 HDG Bolt (1) 5/16" Hex HDG Nut (1) Hy-Lug YA4C-L4 Compression Terminal Lug |
None is the Default Selection for a Top Cap or Plate as there
are no Top Cap Sections in the 45GSR Series Tower Series.
The Rails are Solid, not Hollow, and Terminate to Flanges.
We Offer These Optional Caps and Plates when Ordering:
| OPTIONAL TOP CAPS / PLATES FOR 45SR040 KIT | |||
|---|---|---|---|
| PART NUMBER | DESCRIPTION | HEIGHT | Mast OD |
| APL4A | Assembly Plate and Accessory Mount | 0' | N/A |
| 45GSRTTA | Tapered Cap with Mast Stub | 13.5" | 2.375" |
| BPL45GSR | Thrust Bearing Plate | 0' | N/A |
| Lightning Rod+Cap | (1) LRCL + (1) VW132 Mount | 0' | N/A |
Self-Supporting Towers are limited in Height due to the nature of Antenna and Ice loads versus the Cantilever Nature Of Wind against them, offset by the weight of the Foundation and the cohesive of the soil to counter a Tower tip-over moment, as well as the strength of the tower members to withstand these Forces against them. ROHN Tower Kits are designed based on assumptions made regarding Windspeed, EPA (Antenna Load), Height, Standard Soil Conditions, Surrounding Environment and Duty. The Pre-packaged Kits contain the parts called for based on this Stock Design. The Stock Design of these Kits does not account for the Variations of Historic Windspeed, Number of Antenna(e) Loading at Specific Height(s), Soil Engineering recommendations, Adjacent Structures, Communications Purpose, or Geo-Political Rules, Laws and Codes That will be Applicable to Your Project. It is Recommended that you take the time to engage an local Engineer that has the expertise and available Information necessary to evaluate the Stock design for Applicability, and/or find the Tower Quote Data Sheet Form by clicking the link that appears on the Footer of this Page Below. *Per Rev G requirements, any structure greater than 10' foot requires a climber safety device.
Download
ROHN DM45G2 Microwave Dish Antenna Mount with 5' foot by 2.38" OD Pipe for 45G 45GSR Tower
- $289.00
TYRAP CABLE TIES
A cable tie is a band or length of strap manufactured from a class of polymeric materials known as polyamides (Nylon 6/6). The width, length and head area of the zip ties employ ratcheting mechanisms to bundle and then lock items together.
Commercially introduced in 1938, nylon was the first synthetic semi-crystalline polymer whose physical properties compared favorably to some metals. Nylon possesses an outstanding balance of properties, combining strength, moderate stiffness, high service temperature and a high level of toughness. Particularly resistant to repeated impact, nylon has a low coefficient of friction and excellent abrasion resistance. It is resistant to fuels, lubricants, and most chemicals, but is attacked by phenols, strong acids and oxidizing agents (ref. Our Physical and Chemical Certification for further information). Nylon is inherently susceptible to environmental conditions; however, ACT nylon cable ties are moisturized to attain optimum performance levels. Nylon products should be stored in a cool, dry area, out of direct sunlight, and sealed in the original packaging material to extend performance levels indefinitely.
3 Types of Nylon for Specific Applications
General-Purpose Nylon 6/6 is suitable for most applications at a continuous temperature up to 150º F. Nylon 6/6, the grade most often used for nylon cable ties, meets UL 94V-2 flammability ratings. Its working temperature range is 40º F. to 185º F.
Heat Stabilized Nylon 6/6 is used for applications with continuous or extended exposure to high temperatures, up to 250º F., and thereby meeting UL standards for electrical applications. ACT nylon cable ties contain specially formulated heat stabilizers to provide additional thermal endurance.
UV Stabilized Nylon 6/6 is used in applications of continuous or extended exposure to outdoor elements. The weather-resistant grade, able to endure additional ultraviolet (UV) light, is produced by incorporating stabilizers in the nylon resin. ACT's UV Stabilized Nylon cable ties are available only in black.
