ROHN 65G 10 Foot Main Tower Section R-65G
ROHN 65G Standard 10 Foot Main Tower Section
The 65G is available in the standard 10 foot section length. This tower uses bolted flange joints. Featuring an 24-1/4 inch equilateral triangular design, the 65G is constructed of extra heavy duty 1.90" O.D. steel tubing side rails with continuous 5/8" solid steel rod bracing. Each 10 foot section is shipped containing all required nuts and bolts shipped with section. The 65G tower can be used guyed, self-supporting configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 500 feet. The 65G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog.
This Item Ships LTL Freight ONLY...
Click Here for: What You Want to Know about Shipping!
Download
Since there are various other Manufacturers of Towers and Tower accessories that copy the ROHN Tower design, if you are not sure of the manufacturer of your Tower, you can at least compare the actual measurements and design of yours to those found in the spec. sheets in the ROHN catalog section via the Link provided above to assure yourself that additional sections or parts will fit. We cannot make that determination for you as the ROHN clones are something we don't carry or otherwise represent in our Product line. All towers in the GT Series are constructed with high strength steel tubing and feature ROHN's exclusive Zig-Zag ® solid rod bracing to provide exceptional strength. All GT Series Towers are hot dip galvanized after fabrication. In this process, each section of the tower is totally immersed in molten zinc, allowing every square inch of the tower, inside and out, to be completely covered. Hot dip galvanizing protects all points of welding and construction against rust and corrosion while providing an attractive finish. The 65G is a true multi-use structure that provides excellent strength for applications up to 500´ with heavy steel tube legs to satisfy a wide variety of needs under varied conditions. When properly installed, the standard tower will support the loads shown on various guyed and self-supporting information sheets in the ROHN catalog. Most Restrictions Allow for 40 feet of Height without the Necessity of Guy Wires, Anchors or Braces. However, No Tower is self supporting during construction! Always use temporary guys on the top most section, and install permanent guy wires as soon as a guy point height is reached.
This Buyers Guide will answer many questions you may have on this Product Line.
Sorry, we are offline,
click here to send us message
