Single Side Arm Antenna Mount Assembly for 45G/45GSR/55G Series Tower | 4555MT
3 Star Inc
Made in the USA!
This Mount is a Heavy Duty Assembly comprised of (2) 2.00" inch HDG Angle Iron crossmembers, each 4' feet long (48" inches), that one one side, perpendicularly cross and clamp to the two Rails of Any 45G, 45GSR, 55G Tower Style Section Face, parallel to each other with about 3'-4' feet spacing between them. On the other side, at the Crossmember ends, braces a 4'-5' foot Mast Pipe (Typical, Pipe OPTIONAL) resulting in an approx. 23-1/2" inch Stand-Off (Rail Center to Mast Pipe Center) on one Side of the Tower Section Face.
The The Assembly can mount an Antenna Mast Pipe anywhere from 1-1/2 to 2-7/8 OD. on both sides
The Angle Iron, Mast Pipe (OPTIONAL) and Saddle Clamps that Attach them all are Hot Dip Galvanized, and the Bolt Hardware is HDG Grade 5. These Double Side Arm Mounts are intended for Light Weight Broadband, Wifi ,SCADA and Narrow Beamwidth Two-way Antennas.
Will Fit most ROHN, Nello and American Towers G-Style Communications Tower Series.
A Product of 3 Star Inc
Includes:
(2) -4 FT x 3/16" HDG Angle Iron Rail Mounts
(6) -HDG 3.50" inch Saddle Clamps
(12)-3/8" x 2-1/2" HDG Full Tread Bolt Assembly
Mounting Tube (Optional Size Packages Available):
A
(1) -4' foot x 2.0" SCH40 (2-3/8" OD) HDG Pipe or;
(1) -4' foot x 2.5" SCH40 (2-7/8" OD) HDG Pipe
ROHN 45GSR Tower Accessories
ROHN Products, LLC Foundation and Base Plate Engineering Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. When Selecting a Base for Your ROHN 45GSR Tower, please evaluate that Structure or Foundation as being conducive to the Plan you envision. As always, Consult your Local Structural Engineer, Building Code and NEC for guidance to Properly Installing and Grounding your ROHN 45GSR Tower Installation.
ROHN Products, LLC manufactures Mounting Brackets to Attach to, and derive Support from your ROHN 45GSR Tower in both Self-Supporting and Guyed Installations. Assure yourself through Investigation that the Load you wish to add to the ROHN 45GSR Tower is Engineered into the total Load. As always, Consult your Local Structural Engineer and Building Code for guidance.
ROHN Products, LLC manufactures Mounts to Facilitate Attachment of Popular Antenna Designs for a Multitude of Applications, including but not limited to; Wireless Internet, Amateur Radio, Cellular Telephone, SCADA, Telemetry, PCS, Microwave Point to Point, Microwave Point to Multi-Point, MDS, MMDS, Broadcast, Off-Air TV, Satellite TV, DBS, WI-FI, Business Band or CB Antenna Installations. Most Antenna Mounts differences involve the Diameter and Length of the Masting used, or to be applied for Use with the Particular Antenna Dimensions and Wind Loading involved. Wind Loading, Antenna Loading and Wind Survivability ratings vs. Height Documentation Provided by ROHN is available here as a Resource, but is by no means complete by itself or a substitution for Engineering Conducted Specific to your Application. Contact Us with any Questions you may have regarding Use prior to Purchase.
All Information regarding the ROHN 45GSR Tower line, Parts and Accessories is as accurate and complete as we can possibly provide given that this Resource Offering is subject to change without Notice and is beyond Our Control.
This Buyers Guide will answer many questions you may have on this Product Line.
Sorry, we are offline,
click here to send us message
