Telescopic Mast Push Up Pole for TV, Wireless Internet, booster, Ham & Other Aerial Antenna | ROHN H30
ROHN H30 Foot Telescoping TV Antenna Mast
Made in the USA!
Used for Off-Air TV Antenna, Amateur (Ham) Radio, Wireless Internet Antenna, MMDS and Cell Phone Signal Booster, Emergency Dispatch and Public Utilities Installations. All aerial Telescoping push-up Masts are galvanized and come with hardware designed to support light duty aerial antennas. The unique Rohn design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common mast. Each section extends deeper into the lower tubes than most designs, adding to the masts stability. Height listed describes the overall pipe length. Due to overlapping sections of pipe, the extended masts will be shorter. This Mast fully extends to about 27' Feet. The shipping dimensions are 10' feet x 4" x 4" and ships Freight Only to Commercial and Residential addresses.
Estimated Usable Extended Height is around 27 Feet.
Mast Section Dimensions are:
(1) 10'0" length x 1.25" O.D. (16 AWG)
(2) 9'10" length x 1.50" O.D. (18 AWG)
(3) 9'04" length x 1.75" O.D. (18 AWG)
Compare to Channel Master 1630, 1830 Telescopic Masts!
This Item Ships LTL Freight ONLY...
Installation Guidelines:
- Installation or dismantling of telescoping masts require professional contractors experienced with guyed masts.
- All installations must be bracketed or guyed.
- The pictured guy wire kit layouts are for a typical installation. Individual installation requirements may vary.
- Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
Specifications
Professional Grade Telescopic Push Up Poles for Digital TV, Wifi Antenna & Weather Sensors.
We stock the highest quality telescopic masts made from 18 and 16 AWG galvanized steel right here in the USA. These push up poles are suitable for tons of applications where a fast an simple extension is needed. They have been used for everything from digital TV antenna applications to wireless communications to weather stations and even IoT Sensors. The masts can be used retracted or fully extended and anywhere in between. They can be supported and mounted against a structure, mounted on a roof or even guyed in the middle of a field. Our reliable and durable telescopic poles come in heights of 20, 30, 35, 40 and 50 FT and all have a engineered thumbscrew/collar system for setting height.
Note:
These telescoping masts are not recommended for commercial, CB or beam antenna installations.
Antenna load (top load ) should not exceed an effective projected area ( EPA ) of 2 square feet ( see your antenna specifications
Looking for just a simple mast pipe? View our similar antenna mast poles for lengths ranging from 5 FT to 10 FT and our variety of telescopic mast mounts to complete your next installation.
Sorry, we are offline,
click here to send us message
